This database is not maintained anymore and will be shut down shortly. Please use the Z-Wave Alliance Product Catalogue as an alternative.
Login

Device Description

Product Name: Curtain Motor
Brand Name: Jintaobao
Product Line: Home Automatic Products
Product Code: JTB-1007-02
Product Version: 1.10
Product Comment:
Battery Type:
Battery Count:
Description: JTB-1007 is a Z-Wave enabled curtian motor support scene setting.
Inclusion Note: 3. Click the PB-button once, located near by motor power socket.
Wakeup Note:
 
Default Image: Not available

Device Data

Hash Weak: 04-11-07
Hash Strong: 015a-1007-0002-06-03-67-02-01
Manufacturer: Jin Tao Bao (0x015A)
Product Type ID: 0x1007
Product ID: 0x0002
Library Type: 0x06
Protocol Version: 0x03
Protocol Sub Version: 0x67
Application Version: 0x02
Application Sub Version: 0x01
Basic Class: Slave with routing capabilities
Generic Class: Multilevel Switch
Specific Class: Motor Control Class C
Optional Flag: Yes
Listening Flag: Yes
Routing Flag: No
Beam Sensor 0
RF Frequency EU
Certification ID:
Certification Number:
Submitter: tolo
Create time: 2015-04-13 12:28:26
Last changed: 2015-04-13 13:02:48

Implemented Command Classes

Command Class Byte Version Support Control In NIF Secure Non Secure
Association 0x85 1 Yes No Yes No Yes
Binary Switch 0x25 1 Yes No Yes No Yes
Multilevel Switch 0x26 3 Yes No Yes No Yes
Configuration 0x70 1 Yes No Yes No Yes
Scene Activation 0x2B 1 Yes No Yes No Yes
Scene Actuator Configuration 0x2C 1 Yes No Yes No Yes
Manufacturer Specific 0x72 1 Yes No Yes No Yes
Version 0x86 1 Yes No Yes No Yes
Basic 0x20 1 Yes No Yes No Yes

Config Parameters

Paramter No. 17 Size 4 Default 0
Name Motor Open, Go to Direction B
Description Set only, any value possible
Type constant
Values
 
Paramter No. 18 Size 4 Default 0
Name Motor Stop
Description Set only, any value possible
Type constant
Values
 
Paramter No. 19 Size 4 Default 0
Name Motor Close, Go to Direction A
Description Set only, any value possible
Type constant
Values
 
Paramter No. 20 Size 4 Default 0
Name Motor Position
Description Return motor current position
Type range
Values
0 - 99   ->   Set the parameter to move motor to desired position.
 
Paramter No. 21 Size 2 Default 0
Name Return motor current position
Description Get only
Type range
Values
0 - 99   ->   Define the value.
 
Paramter No. 22 Size 4 Default 0
Name Motor revert direction
Description Set only, any value possible
Type constant
Values
 
Paramter No. 23 Size 1 Default 0
Name Clear motor lead tail endpoint setting
Description Set only, any value possible
Type constant
Values
 
Paramter No. 32 Size 1 Default 0
Name Return motor status flag
Description Get Only
Type bitset
Values
0   ->   motor is closing, go to direction A
1   ->   motor is opening, go to direction B
2   ->   motor endpoint A has setting
3   ->   motor endpoint B has setting
4   ->   (Reserved)
5   ->   (Reserved)
6   ->   (Reserved)
7   ->   direction revert
 
Paramter No. 33 Size 4 Default 0
Name Enable manual pulling function
Description Set only, any value possible
Type constant
Values
 
Paramter No. 34 Size 4 Default 0
Name Disable manual pulling function
Description Set only, any value possible
Type constant
Values
 

Association Groups

Group Number Max Nodes Description
1 5 Association Group is assigned to the device status - sending the multilevel report frame to the associated devices while curtain position is change.

Endpoints

Alarm Mappings

 

Back to list, XML